Troubleshooting 35
Unmounting the Workstation 6
1. Disconnect all cables from the I/O ports.
2. Tilt the Workstation 6 Head back to angle the I/O ports up.
3. Disconnect the DC power cable.
4. If you secured the Workstation 6 to the adjustable stand using a security screw,
remove the security screw.
5. Pull down the quick release pin and push the Workstation 6 Head lightly.
6. Slide the Workstation 6 Head all the way back and then lift to unmount the
Workstation 6.
To Next Page
Loading...
