cleaning
B-4 StorageTek SL8500 Library Guide
Media Type 9840_Cleaning
Status ok
Usage Count 0
Object Cartridge cleaning
cleaning import <cap device address> [ to { 1 | 2 | 3 | 4 | * } ]
Imports cleaning and diagnostic cartridges to system slots. Only one import/export
operation is allowed at a time. There must be a minimum 9 empty system slots for
SL8500 libraries to allow imports.
■ <cap device address> - specifies the CAP to use for the import operation, in library,
rail, column, side, row format.
■ to { 1 | 2 | 3 | 4 | * } - specifies the rail to import cartridge to if possible (optional)
Example:
SL8500> cleaning import 1,2,55,1,0 to 1
requestId
requestId 10101
Message CAP open(ing). Place cartridges to import in CAP, then close CAP.Use
CONTINUE cmd to proceed...
Done
Failure Count 0
Success Count 0
COMPLETED
cleaning export <cap device address> cleaning select { 1 | 2 | 3 | 4 | expired }
Exports selected cleaning cartridges. Only one import/export operation is allowed at a
time.
■ <cap device address> - specifies the CAP to use for the export operation, in library,
rail, column, side, row format.
■ select { 1 | 2 | 3 | 4 | expired } - specifies the rail number to export cleaning
cartridges from.
Example:
SL8500> cleaning export 1,2,55,2,0 cleaning select expired
requestId
requestId 9601
Address 1.4.-52.1.12
Success Cartridge Exported
Volume Label CLN002CU
Message CAP open(ing). Remove cartridges, then close CAP.Use CONTINUE cmd to
proceed...
Done
Failure Count 0
Success Count 1
COMPLETED
cleaning export <cap device address> <cartridge address>
Exports a specific cleaning or diagnostic cartridge to the specified cap. Only one
import/export operation is allowed at a time.
■ <cap device address> - specifies the CAP to use for the export operation, in library,
rail, column, side, row format.
■ <cartridge address> - specifies the location of the cartridge to export in library, rail,
column, side, row format. The specified cartridge must be in a system slot and
must be either a cleaning or diagnostic cartridge.