Mode Sense Command
112 T10000: Interface Reference Manual August 2016
Parameter Value
LLBAA: Long LBA Accepted 0 = Normal
DBD: Disable Block Descriptor 0 = Return block descriptor after header
1 = Do not return the block descriptor
PC: Page Control 00b = Current values
01b = Changeable values
10b = Default values
Page Code: Mode page to return 00h = No page data
01h = Read/Write Error Recovery page
02h = Disconnect–Reconnect page
0Ah = Control Data Protection Mode Page
0Fh = Data Compression page
10h = Device Configuration page
18h = Fibre Channel Logical Unit Control page
19h = Fibre Channel Port Control page
1Ch = Tape Alert page
1Dh = Medium Configuration page
25h = Read/Write Control Page
3Fh = All pages
Subpage Code Subpage to return
Allocation Length Maximum number of bytes to transfer to the host
If both PC and Page Code are 00, no page data is returned.
To Next Page
Loading...
Need help?
General