Mode Select Command
106 T10000: Interface Reference Manual August 2016
TapeAlert Page
TABLE 3-60 Mode Select TapeAlert Page
Byte
Bit
76543210
0 PS SPF (0) Page Code (1Ch)
1 Page Length (0Ah)
2 Perf Reserved EWasc DExcpt Test RSVD LogErr
3 Reserved MRIE (3h)
4
thru
7
(MSB)
Interval Timer
(LSB)
8
thru
11
(MSB)
Report Counter / Test Flag Number
(LSB)
Parameter Value
PS: Parameters Savable 0 = Not supported
SPF: SubPage Format 0 = Mode page format
Perf: Performance 0 = Informational exception operations that cause
delays are acceptable
EWasc: Early Warning 0 = Disable reporting of warning, MRIE Field, ignored
DExcpt: Disable Exception 1 = Target disables all information exception
operations ignoring the MRIE field. In this mode the
software must poll the TapeAlert Log page.
Test: Test operations 0 = Do not generate any false/test informational
exception conditions
LogErr: Log Errors 0 = Logging of informational exception conditions is
vendor-specific
MRIE: Method used to Report Informational
Exception conditions
0h = No reporting of informational exception
conditions, ignored
Interval Timer Must be 0
Report Count/Test Flag Number Must be 0
To Next Page
Loading...
Need help?
General