Oracle StorageTek T10000

Mode Select Command
96 T10000: Interface Reference Manual August 2016
Disconnect–Reconnect Page
TABLE 3-53 Mode Select Disconnect–Reconnect Page
Byte
Bit
76543210
0 PS SPF (0) Page Code (02h)
1 Page Length (0Eh)
2 Buffer full ratio
3 Buffer empty ratio
4
thru
5
(MSB)
Bus inactivity limit
(LSB)
6
thru
7
(MSB)
Disconnect time limit
(LSB)
8
thru
9
(MSB)
Connect time limit
(LSB)
10
thru
11
(MSB)
Maximum burst size
(LSB)
12 EMDP FARd FAWrt FAStat DImm DTDC
13 Reserved
14
thru
15
(MSB)
First burst size
(LSB)
Parameter Value
PS: Parameters Savable 0 = Not supported
SPF: SubPage Format 0 = Mode page format
Buffer Full Ratio 0 = Not supported
Buffer Empty Ratio 0 = Not supported
Bus Inactivity Limit 0 = Not supported
Disconnect Time Limit 0 = Not supported
Connect Time Limit 0 = Not supported
Maximum Burst Size 0 = No limit
EMDP: Enable Modify Data Pointers 0 = Modify data pointers is disabled
FARd: Loop Fairness Algorithm Read 0 = Target chooses
FAWrt: Loop Fairness Algorithm Write 0 = Target chooses