Oracle StorageTek T10000

Report Supported Operation Codes Command
178 T10000: Interface Reference Manual August 2016
All_Commands Parameter Data Format
The Report Supported Operation Codes All_Commands Parameter Data Format
begins with a four-byte header that contains the length in bytes of the parameter data
followed by a list of supported commands.
The list of command descriptors contains all commands supported by the logical
unit.
The Command Data Length field indicates the length in bytes of the command
descriptor list.
Each command descriptor (TABLE 3-133) contains information about a single
supported command CDB.
TABLE 3-132 All_Commands Parameter Data
Byte
Bit
76543210
0
thru
3
(MSB)
Command Data Length (n-3)
(LSB)
Command Descriptors
4 (MSB) Command Descriptor 0
(see TABLE 3-133) (LSB)
thru
.
.
.
n
(MSB) Command Descriptor x
(see TABLE 3-133) (LSB)
TABLE 3-133 Command Descriptor Format
Byte
Bit
76543210
0 Operation Code
1 Reserved
2
thru
3
(MSB)
Service Action
(LSB)
4 Reserved
5 Reserved CTDP SERV
ACTV
6
thru
7
(MSB)
CDB Length
(LSB)
8
thru
19
(MSB) Command Timeouts Descriptor
(see TABLE 3-135 on page 182)
(LSB)