Oracle ZFS ZS3 Series - Setting a Threshold Alert for SSD Endurance (BUI)

Setting a Threshold Alert for SSD Endurance (BUI)
5.
Click OK.
Setting a Threshold Alert for SSD Endurance (BUI)
Use the following procedure to set a threshold alert for SSD endurance.
1.
Go to Configuration > Alerts > Threshold Alerts.
2.
Click the add icon .
3.
In the Threshold field, select SSD: Endurance on any device and specify and its
parameters.
4.
Specify the parameters for Timing and Alert actions.
5.
(Optional) Click TEST to verify the settings.
6.
Click APPLY.
18 Oracle ZFS Storage Appliance Customer Service Manual • July 2016