LIGHTLAB SETTINGS
CHANGE DATE/TIME
LightLab comes with a factory calibrated internal clock that will last for several years.
The date, time and time zone may be changed as needed to correct for offsets or new
time zones. Daylight savings time is corrected for in the indicated time zones. Press the
Home or Settings button to confirm changes.
EXPORT DATA
LightLab has internal storage where test results and diagnostic data are stored. Data
from the last 100 tests is stored automatically in internal storage. In addition to the
internal storage, there is an external SD card that can store results and data. The SD
card is located on the side of the instrument as shown below:
When the SD card is inserted, test results are automatically saved to the SD card in a
comma separated value (Excel compatible) format. If the SD card is removed during
testing, it is still possible to access test results by using the Export Data function. The
Export Data function also allows export of diagnostic data that can be used by Orange
Photonics Support to help troubleshoot an instrument. To export data, follow these
instructions:
To Next Page
Loading...