SAMPLE ANALYISIS- CUSTOM
3. Add sample tags to the sample record if desired. These tags will be saved along
with the sample results and can be accessed later.
4. Gather a representative sample to be analyzed. The amount of sample required
will vary depending on the potency and type of sample. LightLab analyzer can
analyze between 0.1-3mg cannabinoid/1ml LightLab solvent. The recommended
target value is 1.5mg cannabinoid/1ml LightLab solvent. We recommend using
at least 10ml of LightLab solvent and 100mg of sample for best accuracy.
5. Place scale on level surface and turn on.
To Next Page
Loading...