SAMPLE ANALYISIS- CUSTOM
8. Add the amount of sample required for analysis to the scale (1-99999mg is
allowed). Make sure all sample is within inner circle of cap. Press forward arrow
on the screen.
The sample may alternatively be weighed in a small weigh boat or the sample
vial. If a weigh boat is used, we recommend placing the whole weigh boat into
the sample vial so that no sample is lost during the transfer to the vial.
9. Type in the exact sample reading on the scale. Press forward arrow on the
screen. Note 100mg is 0.100g.
10. Pour sample into the vial. Ensure all the sample is inside the vial and not
trapped in the vial cap threads. Press forward arrow on the LightLab screen.
To Next Page
Loading...