Orbic SPEED X 5G - Page 82

82
• On: Check this box if you want the new application to be able
to access the internet.
• App Name: Enter a name for the custom application.
• Start Port: Enter the beginning of the range of port numbers
used by outgoing trafc for the custom application being
added.
• End Port: Enter the end of the range of port numbers used by
the application.
NOTE: If the application uses a single port instead of a range,
type the same value for both the Start Port and the End Port.
• Protocol: Select the protocol used by the port range from the
drop-down list (TCP, UDP, or both).
• Delete: Check this box to delete a custom application. NOTE:
Click on the Port Filtering tab again to remove deleted custom
applications from view on the screen.
Click Save Changes to save any changes made to the custom
applications.
Port Forwarding tab
Port Forwarding allows incoming trafc from the internet to be
forwarded to a particular device connected to your Wi-Fi network.
Normally, the built-in rewall blocks incoming trafc from the
internet. Port forwarding allows internet users to access any