86
NOTE: If the application uses a single port instead of a range,
type the same value in both the From and To elds.
For translate ports, use the Ext. and Int. to specify ports.
NOTE: Forwarding takes inbound trafc on a port to the
same port on a client device. Use translate ports to send
trafc to a different port on the client device. For example,
instead of having inbound trafc on port 1234 forward to
port 1234 of the client device, you can have it forward to
port 5678.
• Protocol: Select the protocol used by the port range from
the drop-down list (TCP, UDP, or both).
• Delete: Check this box to delete a custom application.
NOTE: Click on the Port Forwarding tab again to remove
deleted custom applications from view on the screen.
Click Save Changes to save any changes made to the custom
applications.
To Next Page
Loading...
