3
OrionWelders.com
FOREWORD:
ank You for Choosing Orion Welders and congratulations on your purchase!
You are now the proud owner of an Orion 100c Welder. is manual was designed to help you set
up the welder and begin welding. Please read and follow all safety precautions before proceeding
with the welding process.
Sunstone Engineering is the parent company of Orion Welders. At Sunstone & Orion we are
committed to producing quality products and ensuring complete owner satisfaction. If you require
assistance after reading this manual please contact us with the information provided below.
Orion Welders, a Subsidiary of
Sunstone Engineering R&D Corp.
1693 American Way Suite #5
Payson, UT 84651
Email: sales@orionwelders.com
Voice: 801-658-0015
Fax: 866-701-1209
Welding Safety Precautions
READ BEFORE WELDING
e following safety advice is generalized advice for the arc-welding industry. ese safety
precautions are not all inclusive. All users should exercise reasonable caution while using this
device. e following group of symbols are warning symbols:
CAUTION, ELECTRIC SHOCK HAZARD, EYE PROTECTION REQUIRED.
Consult these symbols and the related instructions listed next to the symbols for proper action
when dealing with these hazards.
READ INSTRUCTIONS
• Read the owner’s manual before using the Orion.
• Only personnel trained and certified by the manufacturer should service the unit.
• Use only genuine replacement parts from the manufacturer.
SAFETY PRECAUTIONS FOR FIRE OR EXPLOSION
Sparks can fly off from the welding arc. e flying sparks, hot work piece, and hot
To Next Page
Loading...
