Orion FLEX RTA - Start Delay Screen; The Start Delay Screen

Machine Manual Orion
Flex Stretchwrapper Revision 3.0
System Operation 15 February 2016
Page 3-28
Start Delay Screen
This is the Start Delay screen. On this screen, you may set the amount of time, in millisec-
onds that the start button must be pressed before the machine starts.
Figure 3 - 19
The Start Delay
Screen
Table 3-18. The Start Delay Screen Button Descriptions
STATE 1 DESCRIPTION
START DELAY
Press this button to modify the Start Delay value, in terms of milliseconds. This
value determines the amount of time that the Start pushbutton must be pressed
before the machine will start. Min - 500 ms Max - 5000 ms
BACK Press this button to go to the Machine Setup screen.