Orion FLEX RTA User Manual

Orion Machine Manual
Revision 3.0 Flex Stretchwrapper
15 February 2016 Maintenance
Page 5-9
RTD Series
@ 5760 Loads or one month
• Inspect rubber stretch rollers. Clean as needed per instructions in manual.
• Inspect belt condition. Adjust as needed.
@ 17, 280 Loads or three months.
• Inspect tower drive chain. Apply a light coating of lubricant per instructions in man-
ual.
• Inspect prestretch chain and belt. Tension as needed. Apply a light coating of lubricant
per instructions in manual.
• Inspect the pneumatic hardware. Adjust as needed.
@ 34, 560 Loads or 6 months.
• Lubricate ring bearing per instructions in manual.
• Inspect carriage lift chain. Tension and lubricate per instructions in manual.
• Inspect commutator assembly. Blow out debris per instructions in the manual.
RTA Series
5760 Loads or one month
• Inspect rubber stretch rollers. Clean as needed per instructions in manual.
• Inspect belt condition. Adjust as needed.
17, 280 Loads or three months.
• Inspect tower drive chain. Apply a light coating of lubricant per instructions in man-
ual.
• Check the cutter wire for excessive buildup. Replace if kinked or bent.
• Inspect prestretch chain and belt. Tension as needed. Apply a light coating of lubricant
per Instructions in this manual.
• Inspect the pneumatic hardware. Adjust as needed.
34, 560 Loads or 6 months.
• Lubricate ring bearing per instructions in manual.
• Inspect carriage lift chain. Tension and lubricate per instructions in manual.
• Inspect commutator assembly. Blow out debris per instructions in this manual.

Orion FLEX RTA Specifications

General

Brand	Orion
Model	FLEX RTA
Category	Stretch Wrapping Systems
Language	English