Orion FLEX RTA User Manual

Machine Manual Orion
Flex Stretchwrapper Revision 3.0
Maintenance 15 February 2016
Page 5-8
HPA LPA Series
5,760 Loads or one month
• Inspect rubber stretch rollers. Clean as needed per instructions in manual.
• Inspect belt condition. Adjust as needed.
17,280 Loads or three months.
• Inspect under turntable. Clean debris as needed.
• Inspect turntable support casters for good condition.
• Inspect turntable chain. Apply a light coating of lubricant per instructions in manual.
• Inspect prestretch chain and belt. Tension as needed. Apply a light coating of lubricant
per instructions in manual.
• Check the cutter wire for excessive buildup. Replace if kinked or bent.
• Inspect the pneumatic hardware. Adjust as needed.
34,560 Loads or 6 months.
• Lubricate ring bearing
• Inspect carriage lift chain. Tension and lubricate per instructions in manual.
• Inspect commutator assembly. Blow out debris per instructions in the manual.

Orion FLEX RTA Specifications

General

Brand	Orion
Model	FLEX RTA
Category	Stretch Wrapping Systems
Language	English