Orion FLEX RTD User Manual

Machine Manual Orion
Flex Stretchwrapper Revision 3.0
System Operation 15 February 2016
Page 3-8
Table 3-4. The Maintenance Prompts
PREVENTATIVE MAINTENANCE REQUIRED FREQUENCY (LOADS)
INSPECT RUBBER MULTISTRETCH ROLLERS. CLEAN AS NEEDED.
5,760
INSPECT BELT CONDITION. ADJUST AS NEEDED.
5,760
INSPECT BENEATH TURNTABLE. CLEAN DEBRIS AS NEEDED.
17,280
INSPECT TURNTABLE SUPPORT CASTERS FOR GOOD CONDITION.
17,280
INSPECT TURNTABLE CHAIN. APPLY LUBRICATION AS NEEDED.
17,280
INSPECT ROTARY ARM CHAIN. APPLY LUBRICATION AS NEEDED.
17,280
INSPECT MULTISTRETCH CHAIN AND BELT.
TENSION AND/OR LUBRICATE AS NEEDED. 17,280
CHECK HOT WIRE FOR EXCESSIVE BUILDUP. REPLACE IF KINKED
OR BENT. 17,280
INSPECT PNEUMATIC HARDWARE (A MODELS).
ADJUST AS NEEDED. 17,280
LUBRICATE RING BEARING.
34,560
INSPECT CARRIAGE LIFT CHAIN (S MODEL).
TENSION AND/OR LUBRICATE AS NEEDED. 34,560
INSPECT COMMUTATOR ASSEMBLY.
BLOW OUT DEBRIS AS NEEDED. 34,560

Orion FLEX RTD Specifications

General

Brand	Orion
Model	FLEX RTD
Category	Stretch Wrapping Systems
Language	English