Orion FLEX RTD User Manual

Machine Manual Orion
Flex Stretchwrapper Revision 3.0
System Operation 15 February 2016
Page 3-2
Carriage Obstacle Detect Error Recovery
1. When the obstacle detect error occurs, the brake must be released.
2. To release the brake, pull outward on the carriage strap on the front side of the tower
until the brake releases.
3. Align the limit switch on the inside of the tower with the center of the strap.
4. Reset and restart, when ready.
Figure 3 - 1
Pulling Strap to
Release Brake
Figure 3 - 2
Limit Switch
Alignment

Orion FLEX RTD Specifications

General

Brand	Orion
Model	FLEX RTD
Category	Stretch Wrapping Systems
Language	English