Orion FLEX RTD User Manual

Machine Manual Orion
Flex Stretchwrapper Revision 3.0
System Operation 15 February 2016
Page 3-34
Dual Turntable Screen
This is the Dual Turntable Screen. This screen is only used for Dual Turntable equipped
machines. From this screen, you may set the A or B only tables to run or you can choose to
alternate between running the A and B tables every other cycle.
Figure 3 - 24
The Dual Turntable
Screen
Table 3-23. The Dual Turntable Screen Button Descriptions
STATE 1 DESCRIPTION
SELECT TABLE A ONLY Press this button to only use Table A, which is the table that is closest to the tower.
SELECT TABLE B ONLY
Press this button to only use Table B, which is the table that is farthest from the
tower.
SELECT BOTH TABLES
Press this button to use both tables. The machine will alternate between the A and B
tables at the end of each wrap cycle.

Orion FLEX RTD Specifications

General

Brand	Orion
Model	FLEX RTD
Category	Stretch Wrapping Systems
Language	English