Orion FLEX RTD User Manual

Orion Machine Manual
Revision 3.0 Flex Stretchwrapper
15 February 2016 System Operation
Page 3-27
ARM BACKUP
DISABLED
Press this button to enable or disable the Arm
Backup feature (RTA model only). When enabled,
the Rotary Arm will reverse to the Home Prox after
the film was clamped and cut.
ARM BACKUP ENABLED
SECURITY Press this button to go to the Security Settings Screen.
START DELAY Press this button to go to the Start Delay Screen.
FACTORY DEFAULTS Press this button to go to the Factory Defaults Screen.
Table 3-17. The Machine Setup Screen Button Descriptions (Continued)
STATE 1 DESCRIPTION STATE 2

Orion FLEX RTD Specifications

General

Brand	Orion
Model	FLEX RTD
Category	Stretch Wrapping Systems
Language	English