i Series User Manual
2
Table of Contents
Chapter 1: Welder Setup and Assembly ..................... p.3
What is in the Box ....................................... p.3
Mount the Microscope Arm ............................. p.3
Microscope Arm Setup ................................. p.4
Welder Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.4
External Power Supply Setup ........................... p.5
Shielding Gas Setup .................................... p.5
Adjustments on the Microscope Arm ................... p.6
True Color Optical LCD Shutter ......................... p.6
Become Familiar with the Microscope .................. p.7
Electrode Setup ......................................... p.7
Make a Weld ............................................. p.9
Chapter 2: User Interface Overview ......................... p.10
Header Area ............................................ p.10
Waveform Graph Area .................................. p.10
Metals Tab - Controls Area ............................. p.10
Arc Tab - Controls Area ................................. p.11
Additional Information on Seam Mode ................. p.14
Seam Mode Advanced Screen .......................... p.14
Tack Tab - Controls Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.16
Video Tab ............................................... p.16
Load Tab ................................................ p.17
Save Tab ................................................ p.17
Settings Tab ............................................ p.17
Chapter 3: Reading the Waveform Graph .................... p.18
Ignition .................................................. p.18
Waveforms ............................................. p.19
Weld Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.20
Orion Welders
1693 American Way, Unit 5
Payson, UT 84651 USA
+ 1-801-658-0015