IG-267-EN versión 01; 07/04/2017
97
General Instructions
ekor.rpa
User interface
11.3. Fileserver in USB memory
The device shares different types of files with the user using
a USB memory. This flash memory acts as a file server, where
the system can update its configuration or information
using the import and export commands (commands sent
by the user by activating two pushbuttons). The PC user has
access to the files with the read/edit/load option using a
USB cable.
The operations which can be carried out using this
interface are:
• Display/change system settings.
• Display fault reports.
• Display meterings.
• Update the system's firmware or settings.
Figure 11.24. Connections with USB cable
11.3.1. Connection to the system
If the cable configuration is correct, the PC user will see the
new drive detected when connecting to the system:
Figure 11.25. Detection of a new drive unit
To Next Page
Loading...
Need help?
General
