Need help?Do you have a question about the Ormazabal ekor.rps and is the answer not in the manual?
Lists standard and model-dependent protection, automatism, and measurement functions.
Details the local and remote user interface elements and their operation.
Outlines the various hardware possibilities that define a specific model.
Provides examples of digital input/output programming and connection diagrams.
Lists technical specifications for power supply, contacts, and inputs.
Details the programming of physical and internal digital inputs.
Explains the programming of digital outputs based on logical signals.
Details communication settings for front and rear ports, including Ethernet.
Overview and settings for phase overcurrent protection, including timed and instantaneous characteristics.
Overview and settings for neutral overcurrent protection, similar to phase overcurrent.
Settings and criteria for directional operation of overcurrent protections.
Protection for sensitive neutral systems with timed and instantaneous settings.
Directional protection for earth faults in isolated neutral systems.
Protection against overvoltage conditions with timed and instantaneous settings.
Protection against undervoltage conditions with timed and instantaneous settings.
Protection against zero sequence overvoltages.
Protection against field loss in generators.
Protection functions related to active, reactive, and apparent power.
Protection against breaker failure to operate.
Function to estimate fault location on the line.
Overview, operation, and settings for the recloser function.
Details the information stored for the last 20 faults.
Provides details on measurements available at the secondary and primary levels.
Details the steps for connecting the unit, including power and earth connections.
Explains the process of setting and testing the unit after installation.
To Next Page
General
