Operator Manual
Sanitisation
Sanitisation
IUVAPS. System by Orotig, air purification system.
Thanks to this integrated device, the air present in the work environment is sucked up by the laser and undergoes strong decontamination; it is
thus possible to re-introduce it healthy and purified, thanks to the combined irradiation with UVC 210/280 nm light and advanced filtration.
When the I.U.V.A.P. SYSTEM is deactivated ”OFF”, the
machine and the extraction system operate normally
and the UVC sanitising light is off.
By pressing the button and setting I.U.V.A.P. SYSTEM at
”ON” the UVC lights switch on, thus allowing
sanitisation of the environment via normal operation of
the equipment fan. This function can be activated both
in ”STANDBY” and in ”START” modes.
By pressing the button again, the ”PULSED” function is
set, which can only be activated when the machine is in
”STANDBY”. During this operation, the fan extracts
periodically following two work speeds. In this way,
even if the LASER is not used, the environment is
sanitised allowing re-circulation of the air.
To Next Page
Loading...
