ORTEC DSPEC 50 - Page 114

DSPEC 50
®
and DSPEC 502
®
Digital Gamma-Ray Spectrometer User’s Manual 932502G / 0618
SHOW_FAST_COIN
Returns the Coincidence window time and whether the coincidence function is enabled or
disabled.
Examples:
FAST_COIN_ENA 0000000000000.5, 0000000000000.1 0.5 uS window, 0.1 uS delay
Enabled.
FAST_COIN_DISA 0000000000000.5, 0000000000000.1 Fast Coincidence function
disabled.
SHOW_FEATURES
Responds with four 32-bit masks indicating which features are present in the MCB. See
Section 6.2 for a complete description of each bit in the mask.
Example Responses:
Standard Models
FEATURES 02268854591 01083068428 00790633872 02153857247
Advanced Models
FEATURES 02268854591 01099845644 00790633872 04267786463
SHOW_FEATURES_EXT
This command is an extension of the SHOW_FEATURES command and returns four 32-bit
masks indicating which features are present in the MCB starting with Bit 128.
Example Responses:
Standard Models
FEATURESEX 00000000000 00000000000 00000000000 00000000000
Advanced Models
FEATURESEX 00000000031 00000000000 00000000000 00000000000
SHOW_GAIN_ADJUST
Returns the gain-stabilizer amplifier setting.
SHOW_GAIN_CHANNEL
Reports the current center channel for the stabilizer gain peak. See also
SET_GAIN_CHANNEL.
Responses:
$C00000087<CR> Gain channel has not been set.
$C00002089<CR> Gain channel is channel 2 (lowest possible channel).
... ...
$C16382107<CR> Gain channel is channel 16382 (highest possible channel).
104