Software installation
Open-source
Arduino
Software(IDE)
Download Arduino IDE here:
https://www.arduino.cc/en/Main/Software?setlang=en
7 zip is a free
zip
utility that un-
zips zip files
Download 7zip here for free
https://www.7-zip.org/
Step 1: Install latest Arduino IDE (If you have Arduino IDE version after
1.1.16, please skip this step) Download Arduino IDE from
https://www.arduino.cc/en/Main/Software?setlang=en , then install the
software.
Step 2: Download Lesson One sample code
from https://osoyoo.com/driver/v2smartcar-lesson3.zip , unzip the download
zip file v2smartcar-lesson3.zip, you will see a folder called v2smartcar-
lesson3.
Step 3: Connect Arduino UNO to PC with USB cable, Open Arduino IDE ->
click file -> click Open -> choose code “v2smartcar-lesson3.ino” in
v2smartcar-lesson3 folder, load the code into arduino.
To Next Page
Loading...
