EasyManua.ls Logo

OSOYOO V2.1 - Lesson 8 Software Installation; Play the Fighting Game

OSOYOO V2.1
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
84
Open-source
Arduino
Software(IDE)
Download Arduino IDE here:
https://www.arduino.cc/en/Main/Software?
setlang=en
7 zip is a free zip
utility that un-zips
zip files
Download 7zip here for free
https://www.7-zip.org/
OSOYOO
imitation driving
Robot APP
search “OSOYOO imitation driving” in
Google Play or Apple APP store
Step 1: Download and install Arduino sketch code
from https://osoyoo.com/driver/v2smartcar-lesson8.zip. Unzip this file, and
you will see folders called v2smartcar-lesson8A and v2smartcar-lesson8B
Step 2: Upload code “v2smartcar-lesson8A.ino” in v2smartcar-lesson8A
folder for Team A robots and Upload code “v2smartcar-lesson8B.ino” in
v2smartcar-lesson8B folder for Team B robots
Step 3: If you have installed APP in Lesson 7, please skip this step.
Otherwise go to Google Play and search the APP name “Osoyoo imitation
driving”, and install the APP to your mobile phone.
Step 4: After install the APP, pair the HC-02 bluetooth module to your mobile
phone, and then open Osoyoo Imitation driving APP. You will find a BTSearch
list, click HC-02 device to connect the bluetooth device on your car.
Play the Fighting Game
In your APP, click Engine Toggle icon, your robot car will start moving. Use
your steering wheel, gear to change your car direction. When you find your
enemy, click “F1” to trigger bullet against bullet. If your bullet hits enemy car,
enemy car will freeze, buzzer and dead. If you are hit by enemy’s bullet, you
car will freeze and your APP will show “dead”.

Table of Contents

Related product manuals