14.6 Importing sample report lists
These sample report lists can be imported:
Symptoms, Impressions, and Macros.
1. In the navigation panel, from the Reports menu, click Reports.
2. If the Edit Report window is not displayed, click Edit Report.
3. Click Symptoms..., Impressions..., or Macros...
4. Click Import.
5. Click the appropriate file in the correct language to import: Impulse Symptoms, Impulse Impressions, or Impulse
Macros.
6. Click Open.
7. Click Save.
Note• If you are upgrading and adding a module (for example, LARP/RALP), it is recommended that you reimport the
impressions and macros. All customizations to the previously imported impressions and macros will be maintained.
14.7 Importing demo data
Note• The demo data can be imported giving you the ability to view patient data and analysis for various diagnoses.
1. If the Patients window is not open, click Patient List.
2. Click Import.
3. Click Open Folder. The Import folder is highlighted.
4. Below the Import folder click the Demodata folder and click OK.
5. Select all patient files that appear in the Patient Import window.
6. Click Import.
7. Click OK.
Note• If you are upgrading and adding a module (for example, LARP/RALP), it is recommended that you import any
new demo data files. This will assist you in learning the new module.
14.8 Customizing for your facility
For standalone installations, enter facility specific information at each workstation where the software is installed. For net-
work installations, facility-specific information entered at one client station will change the information at all client sta-
tions.
Otometrics - ICS Impulse USB
117
14 Installation and Setup
To Next Page
Loading...
