otometrics ICS Impulse USB - Analysis Details for Repositioning Tests

10.11.2 Analysis details
Info
The test parameters are listed:
• Test Type – name of test for which data has been collected
• Operator – the person who was logged into OTOSuite Vestibular software when the data was collected
• Calibration ∆ – the distance in pixels between the right and left eye positions measured during calibration
• Test Time – date and time data collection was started
• ElapsedTime – duration of the test
• Begin Time – time at which analysis began
• Beat SPV – the slow phase velocity for the selected beat
• Peak SPV – where the slow phase velocity peak is set (For more information, refer to the Reference Manual appendix
that describes how the SPV peak is determined.)
Remarks
Remarksregarding the test can be entered before, during, and after testing. To add or modify remarks, click the Remarks
window tab. For information about the editing tools, refer to the Reference Manual.
Note• Text previously added in the Test window appears in the Remarks window.
94 Otometrics - ICS Impulse USB
10 Positional