Overland Storage SnapServer - Page 65

10400589-001 ©2008-14 Overland Storage, Inc.  65
SnapServer / GuardianOS 7.6 Administrator’s Guide 4 - Network Settings
NOTE: You cannot select Active Directory Domain if NTP is enabled.
3. Edit the fields shown in the following table:
Option Description
Enable Windows
Networking (SMB)
Check the box to enable SMB and activate the options. Clear the
box to disable.
Member Of Verify it shows Active Directory Domain.
Domain Name The default settings make the SnapServer available in the
workgroup named Workgroup. Enter the domain name to which
the server belongs.
NOTE: Windows 2000 domain controllers must run SP2 or later.
Administrator Name /
Administrator Password
If joining a domain, enter the user name and password of a user
with domain join privileges (typically an administrative user).
Organizational Unit To create a machine account at a different location than the
default, enter a name in the field. By default, this field is blank,
signaling the domain controller to use a default defined within the
controller.
NOTE: Sub-organizational units can be specified using Full
Distinguished Name LDAP syntax or a simple path
([org_unit]/[sub-unit1]/[sub-unit1a])
LDAP Signing Use the drop-down list to set ADS domain LDAP signing to Plain
(no signing), Sign, or Seal, as appropriate for your domain. Default
setting is Plain.
Enable Guest Account Check the box to allow unknown users (or users explicitly logging
in as
Guest) to access the SnapServer using the guest account.
Clear the box to disable this feature.
Enable Opportunistic
Locking
Enabled by default. Opportunistic locking can help performance if
the current user has exclusive access to a file. Clear the box to
disable this feature.
Enable this Server as
the Master Browser
Enabled by default. The SnapServer can maintain the master list
of all computers belonging to a specific workgroup. (At least one
Master Browser must be active per workgroup.) Check the box if
you plan to install this server in a Windows environment and you
want this server to be able to serve as the Master Browser for a
workgroup. Clear the box to disable this feature.
Allow Root
Authentication
Check the box to allow root login to the server. Clear the box to
disable this feature.
NOTE: The root password is synchronized with the server’s
admin password.
Disable NetBIOS over
TCP/IP
Some administrators may wish to disable NetBIOS over TCP/IP.
Check the box to disable NetBIOS; clear the box to leave NetBIOS
enabled.
NOTE: If you disable NetBIOS and you are joining a domain, you
must enter the domain name as a fully qualified domain
name (such as, “actdirdomname.companyname.com”).
A short form such as “ActDirDomName” does not work.