Owandy One - Environmental Risks and Displacement; Manufacturer Identification

EN
ONE – User manual Page 12/44
1.16 Environmental risks and displacement
Some parts of the device contain materials that, at the end of the unit’s lifecycle, must be disposed of at appropriate
disposal centres. In particular the device contains the following materials and/or components:
 Non biodegradable plastic materials
 Copper
 Printed circuit boards with electronic components
 Metal parts
Note Information for users of European Community according to 2011/65/EU Directive on the restriction of the use
of certain hazardous substances in electrical and electronic equipment
The symbol with the waste bin crossed on the equipment or its packaging, indicates that the product must be
separately collected from other waste at the end of its life. The separate collection of the present equipment that
has reached end of its life is organised and managed by the manufacturer.
The user who wishes to dispose of this equipment must contact the manufacturer and follow their system to enable
the separate collection of the equipment at the end of its life.
Suitable separate waste collection for the subsequent start of the equipment discarded for recycling, for treatment
and for environmentally friendly disposal, contributes in preventing possible adverse effects on the environment
and health and promotes the reuse and/or recycling of materials of which the equipment is comprised.
Illegal disposal of the product by the holder implies the application of administrative sanctions provided by law.
1.17 Manufacturer identification
Manufacturer:
Owandy Radiology sas.
2, rue des Vieilles Vignes
77183 Croissy-Beaubourg
FRANCE