Owandy One - 7 Specifications; 7.1 General specifications

EN
ONE – User manual Page 39/44
7 Specifications
7.1 General specifications
ONE Sensor - Size 1
External dimensions size 1 sensor
38.6 x 24.7 x 5.2mm
/ 1.6 x 1.0 x 0.2inch
CMOS matrix size 1 sensor (cut corners)
 Sensitive area in size
 Sensitive area in pixels
 Pixel dimensions
30 x 20mm (600mm
2
) / 1.2 x 0.8inch (1.0inch
2
)
1500 x 1000pixels
20 x 20µm
ONE Sensor - Size 2
External dimensions size 2 sensor
43.2 x 30.8 x 5.2mm / 1.7 x 1.2 x 0.2inch
CMOS matrix size 2 sensor (cut corners)
 Sensitive area in size
 Sensitive area in pixels
 Pixel dimensions
34 x 26mm (900mm
2
) / 1.3 x 1.0inch (1.3inch
2
)
1700 x 1300pixels
20 x 20µm
Technical specifications (size 1 and 2 sensors)
Length sensor cable
3m / 9.9ft
Grey levels
14bits (16384 grey levels)
Connection
USB standard:
USB 2.0 High-Speed (480Mbit/s) and
USB 3.0
Consumption kit
0.5VA under 5V (USB port)
Input voltage sensor
Sensor current absorption
5V (USB port)
0.15A
Operating temperature
+10°C to +35°C / 50°F to 95°F
Lifespan CMOS
Min. 100,000 cycles
Standards
Conformity to standards
IEC60601-1 3ed (2005)+A1 (2012)
IEC 60601-1-6 3ed (2010)+A1 (2013)
IEC 62304 1ed (2006)+A1 (2015)
IEC60601-1-2 4ed (2014)
CFR21
Medical Device Directive 93/42/EEC (as
amended)