3.Junior User Guidebook
Channel is off
Channel is on and selected
Channel is on
Selected
Unselected
Channel pointer
Set the horizontal and vertical position
Click in the area as shown in the figure below, the P icon will appear. Click
anywhere outside the icon to hide it.
Note: Swipe up/down or left/right in this area, you can make the icon appear and
control it.
When the P icon appears, in the full screen, swipe left/right to control the
horizontal position, swipe up/down to control the vertical position of the selected
channel.
Control the
horizontal position
Control the vertical position
of the selected channel
Click the P icon to fine-turn, long-press to adjust continuously.
To Next Page
Loading...
Need help?
General
