37
Check water intake
Water intake
Make sure that the sea water
intakes are not clogged by seaweed
or obstacles. Clean if necessary.
Check coolant level and mixture
Expansion tank
1. Check the cooling level, 4 cm
below the filler neck edge. (2).
The cooling system of the engine is
to be filled with a mixture of distilled
water and antifreeze based on
ethylene glycol and/or anticorrosion
additive, see Recommended fluids
and grease.
Coolant must be added at the filler
cap (1) only.
Do not add cold coolant to a warm
engine.
NOTE! Ensure that the mixing ratio
“water-antifreeze” is preserved.
Technical data
Maintenance
Operating Overview
To Next Page
Loading...
