OXE 125 - OXE Engine Fault Codes

63
OXE ENGINE FAULT CODES
Column 1 shows the Suspect Parameter Number (SPN).
Column 2 shows the Failure Mode Indentifier (FMI).
Column 3 gives a short description of the fault.
SPN FMI Description
97 31 Water in fuel is detected.
100 1 Engine oil pressure - Data valid but below normal operational range
100 3 Engine oil pressure sensor - Voltage above normal, or shorted to
high source
100 4 Engine oil pressure sensor - Voltage below normal, or shorted to low
source
102 0 Manifold air pressure - Data valid but above normal operational
range
102 3 Manifold air pressure sensor - Voltage above normal, or shorted to
high source
102 4 Manifold air pressure sensor - Voltage below normal, or shorted to
low source
102 14 Manifold air pressure - Control error
105 3 Manifold air temperature sensor - Voltage above normal, or shorted
to high source
105 4 Manifold air temperature sensor - Voltage below normal, or shorted
to low source
107 0 Air filter differential pressure sensor - Data valid but below normal
operational range
107 3 Air filter differential pressure sensor - Voltage above normal, or
shorted to high source
107 4 Air filter differential pressure sensor - Voltage below normal, or
shorted to low source
108 3 Ambient pressure sensor - Voltage above normal, or shorted to high
source
108 4 Ambient pressure sensor - Voltage below normal, or shorted to low
source
110 0 Engine coolant temperature sensor - Data valid but above normal
operational range
Technical data
Maintenance
Operating Overview