17
OPERATING
BEFORE START-UP
!
WARNING
Risk of accidents! Items in the pre-operation
checks not working properly, should always
be inspected and repaired before operating
the outboard.
Checking the fuel level
– Check the fuel level. Fill up if necessary.
– Ensure that there are no fuel leaks or
fumes.
– Check the fuel line connections to ensure
they are tight.
– Check the water in the fuel filter. Drain off
the water if necessary.
Controls
– Check the throttle, shi, and steering
for proper operation before starting the
engine.
– The controls should work smoothly,
without binding or unusual free play.
– Look for loose or damaged connections.
– Check that the main cable and the
connector are in good condition.
– Check that the gear is in neutral.
Outboard
– Check the outboard and the outboard
mounting.
– Check for loose or damaged fasteners.
– Check the propeller blades for damage.
– Check that the battery cables and
connections are in good condition.
– Check fitting of the top cowling.
NOTE! Check the water surrounding the boat
for any outboard oil leakage!
To Next Page
Loading...
