Check water intake
Water intake
Make sure that the sea water intakes are not
clogged by seaweed or obstacles. Clean if
necessary.
Check coolant level and mixture
Expansion tank
1. Check the cooling level, 4 cm below the
fillerneck edge. (2).
The cooling system of the engine is to be filled
with a mixture of distilled water and antifreeze
based on ethylene glycol and/or anticorrosion
additive, see Recommended fluids and grease.
Coolant must be added at the filler cap (1)
only.
Do not add cold coolant to a warm engine.
Ensure that the mixing ratio “water-antifreeze”
is preserved.
To Next Page
Loading...
