OXE 200 HP - Check the Propeller

38
MAINTENANCE
Check the propeller
!
WARNING
You could be seriously injured if the engine
accidentally starts when you are near the
propeller. Before inspecting, removing, or
installing the propeller, place the shi control
in neutral, turn the key to OFF and remove
the key. Remove the clip from the engine
shut-off switch. Disconnect the battery main
switch.
Loosen or tighten the propeller nut
Do not use your hand to hold the propeller
when loosening or tightening the propeller
nut. Put a wood block between the anti-
cavitation plate and the propeller to prevent
the propeller from turning.
Propeller checkpoints
– Check each of the propeller blades for
erosion or other damage.
– Check the propeller sha for damage.
– Check the splines for wear or damage.
– Check for obstacles tangled around the
propeller sha.
Propeller sha oil seals
– Check the propeller sha oil seals for
leakage. Replace if necessary.