Oxitone 1000M - Preparing for Use; Initial Setup

Oxitone 1000M
User Manual Rev. 1.
2
Page 13 of 39
Wrist device – rear view 5.1.2
Battery charger
5.2. PREPARING FOR USE
To operate the Oxitone 1000M effectively, the operator must:
 Be familiar with its controls and operation.
 Understand its status and messages (see Section 6.1. Monitoring Screen and Display Symbols
and Section Error! Reference source not found.).
Caution: The Oxitone 1000M is designed to operate on adult patients with wrist
between 13-22 cm circumferences.
5.2.1. INITIAL SETUP
 Inspect the Oxitone 1000M case for damage.
 Fully charge the device – see Section 9.1. Charging the Battery.
Note: The initial battery charge can take up to 2 hours. The battery should be
recharged as needed, before the Oxitone 1000M can be used.