Oxitone 1000M
User Manual Rev. 1.
Page 39 of 39
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
-----------------------------------------------------------------------------------------------------------------
NOTES:
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
11.1.2 WARRANTY
Oxitone Ltd. warrants to the initial purchaser for a period of one (1) year from the date of purchase
that: (1) each new product and the software media as delivered are free from defects in workmanship
or materials, and (2) the product and software will perform substantially as labeled in the directions
for use. Oxitone's sole obligation under this warranty is to repair or replace any product or software
that is covered under warranty.
To request a replacement under warranty, purchaser must contact Oxitone for a returned goods
authorization. If Oxitone determines that a product must be replaced under warranty, it will be
replaced and the cost of shipment covered. All other shipping costs shall be the responsibility of
purchaser.
11.2 LIMITED WARRANTY
Oxitone Ltd. warrants that Oxitone 1000M system meet their published specifications at the time of
shipment from the factory. Oxitone further warrants that Oxitone 1000M product was calibrated at
the factory prior to shipment.