Oxitone 1000M
User Manual Rev. 1.
Page 22 of 39
7.3. SYMBOLS
A number of internationally recognized symbols are found on the labels. These relate to safety
requirements and standards and are described below.
Symbol Meaning
Follow instructions for use
Consult instructions for use
Type BF Applied Part (Patient isolation from electrical shock)
CE marking indicating conformance to EC Directive No. 93/42/EEC concerning
medical devices
Authorized representative in the European Community
Indicates separate collection for electrical and electronic equipment (WEEE)
)
2
Not for continuous monitoring (no alarm for SpO
IP32
Protected against vertically falling water drops and ingress of solid foreign
objects greater than or equal to 2.5mm (0.1in.) in diameter per IEC 60529
SN
Manufacturer Serial number
Storage / Shipping temperature range of -20°C to 60°C
Federal law restricts this device to sale by or on the order of a physician (USA
audiences only)
Date of manufacture
Double isolation (charger unit)
Bluetooth figure mark
Non-ionizing electromagnetic radiation. Equipment includes RF transmitters.
Interference may occur in the vicinity of equipment marked with the symbol.
Symbol for manufacturer name and address
To Next Page
Loading...