PART 8: MAINTENANCE AND SERVICE PREVENTIVE MAINTENANCE SCHEDULE
(R05/10) Y53-6032 – 157 –
Battery Battery box and tray Check the box integrity. Clean the drain tube and check for acid leaks.
Check condition of all equipment mounted under the box.
X
Electrical &
lights
Headlamps Check the aim and adjust as required. X
Warning lights in light bar Check at the ignition start position to verify bulbs and Driver Information
Display function.
X
Turn signal Visual check. X
Stop lights Visual check. X
Reverse lights Visual check. X
Alternator Check operation and output. X
Check tightness of the pulley nut. X
Check the tension of the drive belt (see page 210
). X
Check tightness of the terminal hex nuts. X
Starter Check torque on hex nuts. X
ECM connector Check the tightness of the ECM connector. X
Wheel sensors Check for damaged sensors and connectors, and worn or frayed wires. X
Fuel and Diesel Exhaust Fluid
tank sending unit
Check the mounting screws and electrical connections for worn or dam-
aged wires and connectors.
XX
Table 2 Preventative Maintenance Schedule (Continued)
SYSTEM COMPONENT MAINTENANCE TASK
Recommended
PM Interval
I ABCDE
Y53-6032.book Page 157 Monday, May 24, 2010 3:37 PM
To Next Page
Loading...
