2015OPERATIONSMANUAL
54
ADJUST THE BAG
STRETCHER
THE BAG STRETCHER SHOULD
BE SET TO PUT TENSION ON THE
BAG WITHOUT OVER PULLING.
THIS WILL BE DETERMINED BY
THE TUBE SIZE INSTALLED.
WITH GUSSET MANUALLY
EXTENDED, ADJUST BAG
STRETCHER VIA THE PLATE ON
THE BACK SIDE OF THE
CYLINDER UNTIL BAG IS BEING
PULLED TIGHT.
TAKE CARE NOT TO OVER
TIGHTEN AS THIS WILL CAUSE
YOU WRINKLES.
o GOOD
o TOO TIGHT
o TOO LOOSE
To Next Page
Loading...