Installing
For installation procedures, refer to the Quick Start Guide that came with the router. You can also visit the
Dealer Portal on our website for all the current manuals and Quick Start Guides.
Note: If you install the router in a closed or multi-unit rack assembly, the operating ambient temperature
of the rack environment may be greater than room temperature. Make sure you install the equipment
somewhere within the recommended temperature range.
For rack installation, make sure that the amount of air flow required for safe operation of the equipment is
not compromised.
For free-standing installation, make sure that the router has at least 1.5 in. (3.75cm) of clearance on each
side to allow for adequate air flow and cooling.
To Next Page
Loading...
