Accessing the router
To access the router’s GUI:
1. Plug an Ethernet cable from the router to a PC.
2. Make sure your network card is set to obtain an IP address automatically. Then open any Internet
browser and go to the address http://192.168.1.99
or you can simply type pakedgerouter.com
Note: For best results we recommend using Mozilla Firefox as your web browser. If you are using
Internet Explorer, use version 9 or newer.
3. Enter the default username pakedge and the password pakedger. Click login.
Important: Change this default password. See the section “Username/Password.”
To Next Page
Loading...
