Palax C700 COMBI - Intended Use of the Machine; Warning Signs

3
translation
1.3 Intended use of the machine
This Firewood Processor with Conveyor is intended for the purpose of producing
firewood primarily of round timber, but of logs as well.
Use of the machine for any other purposes is prohibited.
Note! Max. capacity of the machine
 For cutting, the maximum diameter of the tree is about 25 cm.
 The maximum length of the log to be processed is 4 metres. If the logs are longer
than this, they must be pre-cut to at most 4 metres.
1.4 Warning signs
Beware of the crosscut
saw-bar
Read the
instruction
manual
Lifting points
Use eye guards
and hearing
protectors
Wear clothes,
which do not hang
loosely
Wear safety shoes
Use protective
gloves
Manual stop of
the splittig
cylinder
Direction of
rotation of tthe
blade
Revolutions
range for PTO-
shaft