Palax C700 COMBI - Type Markings

4
translation
1.5 Type markings
Nameplate on the machine
 The name and address of the manufacturer
 Designation of the machine type
 Serial number and year of manufacture
 Total weight of the machine
 Diameter of the crosscut saw-blade 700mm
 Diameter of the saw-blade hole 35mm
 Max 2000 r.p.m.
 Nameplate at the rear of the crosscut saw housing
 Always mention the serial number and year of manufacture when ordering spare
parts.
Nameplates on the electric drive
3-phase motor
 Voltage 380 V
 Output 7.5 kW
Hydraulic height
adjustment of the
splitting wedge,
optional
Manual
start of the
splitting cylinder
Stay away from moving
partsof the machines
Beware of PTO
-
shaft
Disconnect the machine from the
electric supply before taking to any
service measures
The machine may
only be operated
by one person
Power switch for the
oil heater
Safe distance from the
conveyor
Stopping the machine
by slackening the V-
belts