To Next PageTo Next Page
Need help?Do you have a question about the Palazzetti PREMIUM UI and is the answer not in the manual?
To highlight important information.
To highlight particularly important and delicate operations.
To highlight actions that can cause injury or damage.
Describes the physical parts of the control panel.
Explains the meaning of icons displayed on the screen.
Visual guide showing how to move through the device menus.
Details the display when using a room sensor.
Details the display when using an external thermostat.
Step-by-step instructions for filling the fuel tank.
How to properly connect the device to the mains supply.
Explains access to the settings menu and parameter adjustment.
Instructions for setting the device's current time.
Instructions for setting the device's current date.
How to select fuel type for combustion optimization.
Details the energy-saving mode and restart parameters.
Explains the frost protection feature.
General characteristics of the display view.
Settings for active and idle display brightness.
Information shown when the display is inactive.
Steps to clean the device's screen.
Option to rotate the display for better viewing.
How to switch between Celsius (°C) and Fahrenheit (°F).
How to modify the device's audio output level.
Displays remaining hours until maintenance is due.
Password-protected access to advanced device settings.
Details available device setup options.
Controls the smoke extraction fan speed.
Password-protected access for technical support.
How to prevent unauthorized display access.
How to change the device's interface language.
Shows software version and device details.
Details the two methods for starting the device.
Description of the primary ignition sequence.
Description of the alternative ignition sequence.
How to set the desired ambient temperature.
Adjusts heat output and energy consumption.
Important warnings for safe device startup.
Adjusts the hot air fan speed.
Points to the settings menu for parameter changes.
Steps to turn off the appliance.
Explains the cooldown process after operation.
How the device resumes operation after power loss.
How the device interacts with an external thermostat.
How the device uses its onboard temperature sensor.
How to program automatic start and stop times.
How to activate or deactivate programmed timers.
How to access logged operational data.
Details on what information is logged.
Procedure to clear recorded usage data.
Advice for maximizing product performance.
Tips on heating, eco-friendliness, and maintenance.
Lists common alarms, causes, and resolutions.
Shows how alarm notifications appear on screen.
Procedure to clear active alarm notifications.
Essential verification steps before restarting after an alarm.
Lists common warnings, causes, and solutions.
Procedure to clear active warning notifications.
To highlight important information.
To highlight particularly important and delicate operations.
To highlight actions that can cause injury or damage.
Describes the physical parts of the control panel.
Explains the meaning of icons displayed on the screen.
Visual guide showing how to move through the device menus.
Details the display when using a room sensor.
Details the display when using an external thermostat.
Step-by-step instructions for filling the fuel tank.
How to properly connect the device to the mains supply.
Explains access to the settings menu and parameter adjustment.
Instructions for setting the device's current time.
Instructions for setting the device's current date.
How to select fuel type for combustion optimization.
Details the energy-saving mode and restart parameters.
Explains the frost protection feature.
General characteristics of the display view.
Settings for active and idle display brightness.
Information shown when the display is inactive.
Steps to clean the device's screen.
Option to rotate the display for better viewing.
How to switch between Celsius (°C) and Fahrenheit (°F).
How to modify the device's audio output level.
Displays remaining hours until maintenance is due.
Password-protected access to advanced device settings.
Details available device setup options.
Controls the smoke extraction fan speed.
Password-protected access for technical support.
How to prevent unauthorized display access.
How to change the device's interface language.
Shows software version and device details.
Details the two methods for starting the device.
Description of the primary ignition sequence.
Description of the alternative ignition sequence.
How to set the desired ambient temperature.
Adjusts heat output and energy consumption.
Important warnings for safe device startup.
Adjusts the hot air fan speed.
Points to the settings menu for parameter changes.
Steps to turn off the appliance.
Explains the cooldown process after operation.
How the device resumes operation after power loss.
How the device interacts with an external thermostat.
How the device uses its onboard temperature sensor.
How to program automatic start and stop times.
How to activate or deactivate programmed timers.
How to access logged operational data.
Details on what information is logged.
Procedure to clear recorded usage data.
Advice for maximizing product performance.
Tips on heating, eco-friendliness, and maintenance.
Lists common alarms, causes, and resolutions.
Shows how alarm notifications appear on screen.
Procedure to clear active alarm notifications.
Essential verification steps before restarting after an alarm.
Lists common warnings, causes, and solutions.
Procedure to clear active warning notifications.
General| Brand | Palazzetti |
|---|---|
| Model | PREMIUM UI |
| Category | Monitor |
| Language | English |
