Page 148 Chapter 5
Tip: For best results, Palm IIIxe organizers should be between 10
centimeters (approximately 4 inches) and 1 meter
(approximately 39 inches) apart, and the path between the two
organizers must be clear of obstacles. Beaming distance to
other Palm Computing platform handhelds may be different.
5. Wait for the Beam Status dialog box to indicate that the transfer is
complete before you continue working on your organizer.
To beam an application:
1. Open the Applications Launcher.
2. Tap the Menu icon .
3. Tap App, and then tap Beam.
4. Tap the application you want to transfer.
Note: Some applications are copy-protected and cannot be
beamed. These are listed with a lock icon next to them.
5. Tap Beam.
6. When the Beam Status dialog box appears, point the IR port
directly at the IR port of the receiving organizer.
7. Wait for the Beam Status dialog box to indicate that the transfer is
complete before you continue working on your organizer.
To receive beamed information:
1. Turn on your organizer.
2. Point the IR port directly at the IR port of the transmitting
organizer to open the Beam dialog box.
3. Select a category for the incoming information, create a new
category, or leave the information unfiled.
To Next Page
Loading...
Need help?
General
