Palm IIIxe - Performing a Network Hotsync Operation

Chapter 6 Page 169
Note: See “Network preferences and TCP/IP software” in Chapter 7
for information on creating a network connection.
8. Tap Service and select a service.
9. Tap Done.
10. Tap the Menu icon .
11. Tap Options, then tap Conduit Setup.
Follow the instructions in “Selecting the conduits for a modem
HotSync operation” earlier in this chapter.
Performing a network HotSync operation
After you prepare your computer and your organizer, and select your
Conduit Setup options, you are ready to perform a network HotSync
operation.
To perform a network Hotsync operation:
■ Tap the modem HotSync icon to begin the operation.
Tap here
Tap here